The Navitek® S4 combines the polyvalent S4 autodarkening filter, with one of the largest clear grinding visors available on the market. The Navitek® shell and all its polycarbonates are certified for grinding with the specific standards EN 166B and EN 175B. The visor is made in perfectly clear 1,0mm thick polycarbonate. This high comfort level can be advanced once equipped with side vision in shade DIN 5: the Navitek® S4 then provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate. The Navitek® S4 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses. Positioned into the liftable front frame, the S4 autodarkening filter offers a 93x43mm viewing area with a perfect vision of the fusion during welding thanks to excellent 1/1/1/2 optical classes. The 4 arc sensors are associated to a very fast switching speed of 0,2ms for a flawless detection of the welding arc, with all welding processes: electrodes, MIG/MAG, TIG. Inside stepless knobs allow the welder to select the welding shade (from DIN 9 to DIN 13), to adapt the sensitivity…
The Kapio* S4 combines several key features: The ergonomics provides protection of the forehead, the ears and the neck, while keeping the weight under 460g. Equipped with side vision in shade DIN 5 , the Kapio® provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate. In each graphic version, the Kapio* is available with or without these side vision. The Kapio® S4 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses. The 4 arc sensors are associated to a very fast switching speed of 0.2ms for a flawless detection of the welding arc, with all welding processes. With 1/1/1/2 optical classes, the liquid crystals of the S4 provide a perfect vision of the fusion during welding. Inside stepless knobs allow the welder to select the welding shade (from DIN 9 to DIN 13), to adapt the sensitivity of the 4 arc sensors, and to adjust the delay according to the welding application. The Kapio® shell and all its polycarbonates are certified for grinding with the specific norms EN 166 B and EN…
The Kapio* S3 is the entry-level auto darkening welding helmet. The stepless adjustment of the welding shade from DIN 9 to DIN 13 is completed by the possible settings of the sensitivity level of the 2 arc sensors, as well as the delay back to light shade. The Kapio* S3 is therefore fit for all welding processes: MMA, MIG/MAG and TIG. The excellent ergonomics provides perfect protection of the forehead, the ears and the neck, while keeping the weight at just 460g. The Kapio* S3 is equipped with 2 independent arc sensors which are associated to a very fast switching speed of 0,3ms for a flawless detection of the welding arc, with all welding processes. Based on a 95 x 39mm vision and with excellent 1/1/1/2 optical classes, the liquid crystals of the S3 provide a perfect vision of the fusion during welding.
Made up of either SWA or HO7 cable, in a variety of lengths. Our range of 415v (three phase) extension cables range from 16a to 125a and are all fitted with IP44 and above rated plug and couplers.
Made up of either SWA or HO7 cable, in a variety of lengths. Our range of 415v (three phase) extension cables range from 16a to 125a and are all fitted with IP44 and above rated plug and couplers.
Made up of either SWA or HO7 cable, in a variety of lengths. Our range of 415v (three phase) extension cables range from 16a to 125a and are all fitted with IP44 and above rated plug and couplers.
Made up of either SWA or HO7 cable, in a variety of lengths. Suitable for indoor and outdoor use. Our range of 240v (single phase) extension cables range from 16a to 63a and are all fitted with IP44 and above rated plug and couplers.
Industrial grade IGBT inverter technology ■ DC Pulse TIG/MMA with VRD function option ■ MCU chip for high accuracy, consistency and performance ■ HF or Lift arc ignition, 2T/4T, spot-time ■ Up/down slope, pre/post flow, crater/initial/weld current ■ Digital panel with interface for easy software upgrades ■ Gas test function in DC TIG mode ■ Modular design with trolley and water cooler included ■ Automatic 8 channel storage of welding parameters ■ On demand fan and water cooling.
